Carbon Black

Carbon black is a material produced by the incomplete combustion of heavy petroleum products such as FCC tar, coal tar, ethylene cracking tar, and a small amount from vegetable oil. Carbon black is a form of amorphous carbon that has a high surface area to volume ratio, although its surface area to volume ratio is low compared to activated carbon. It is dissimilar to soot because of its much higher surface area to volume ratio and significantly less (negligible and non-bioavailable) PAH content. Carbon black is used as a pigment and reinforcement in rubber and plastic products.

The current International Agency for Research on Cancer (IARC) evaluation is that, "Carbon black is possibly carcinogenic to humans (Group 2B)". Short-term exposure to high concentrations of carbon black dust may produce discomfort to the upper respiratory tract, through mechanical irritation.

Common uses:
The most common use [70%] of carbon black is as a pigment and reinforcing phase in automobile tires. Carbon black also helps conduct heat away from the tread and belt area of the tire, reducing thermal damage and increasing tire life. Carbon black particles are also employed in some radar absorbent materials and in photocopier and laser printer toner.

Total production was around 8,100,000 metric tons (8,930,000 short tons) in 2006. About 20% of world production goes into belts, hoses, and other non-tire rubber goods. The balance is mainly used as a pigment in inks, coatings and plastics. For example, it is added to polypropylene because it absorbs ultraviolet radiation, which causes the material to degrade.

Carbon black from vegetable origin is used as a food coloring, in Europe known as additive E153.

Pigment:
Carbon black (Colour Index International, PBL-7) is the name of a common black pigment, traditionally produced from charring organic materials such as wood or bone. It consists of pure elemental carbon, and it appears black because it reflects almost no light in the visible part of the spectrum. It is known by a variety of names, each of which reflects a traditional method for producing carbon black:

> Ivory black was traditionally produced by charring ivory or bones (see bone char).
> Vine black was traditionally produced by charring desiccated grape vines and stems.
> Lamp black was traditionally produced by collecting soot, also known as lampblack, from oil lamps.

Newer methods of producing carbon black have superseded these traditional sources, although some materials are still produced using traditional methods. For artisanal purposes, it is very useful.

Surface chemistry:
All carbon blacks have chemisorbed oxygen complexes (i.e., carboxylic, quinonic, lactonic, phenolic groups and others) on their surfaces to varying degrees depending on the conditions of manufacture. These surface oxygen groups are collectively referred to as volatile content. It is also known to be a non-conductive material due to its volatile content.

The coatings and inks industries prefer grades of carbon black that are acid oxidized. Acid is sprayed in high temperature dryers during the manufacturing process to change the inherent surface chemistry of the black. The amount of chemically-bonded oxygen on the surface area of the black is increased to enhance performance characteristics.

Customer Reviews: